.png)
| MODEL | SPM - 130 | SPM - 160 | |
| INJECTION UNIT | UNIT | SPECIFICATION | |
| SHOT WEIGHT (GPPS) | gms | 283 | 384 |
| THEORETICAL DISPLACEMENT | cc | 318 | 432 |
| INJECTION PRESSURE | bar | 1599 | 1641 |
| INJECTION RATE | cc/sec | 372 | 459 |
| INJECTION SPEED | mm/sec | 300 | 300 |
| INJECTION SCREW STROKE | mm | 200 | 220 |
| SCREW DIAMETER | mm | 45 | 50 |
| SCREW L/D RATIO | n° | 22.2 | 21.6 |
| SCREW SPEED | rpm | 300 | 300 |
| PLASTICIZING RATE (GPPS) | gm/sec | 31.5 | 42.5 |
| NOZZLE DEPTH | mm | 45 | 50 |
| NOZZLE HOLDING FORCE | KN | 45 | 45 |
| HEATING POWER | kw | 11.5 | 15.7 |
| NO OF HEATING ZONE | n° | 4+1 | 4+1 |
| CLAMP UNIT | |||
| MOULD CLAMPING FORCE | KN | 1250 | 1600 |
| MOULD OPENING STROKE | mm | 380 | 430 |
| MOULD HEIGHT MIN / MAX | mm | 180/450 | 200/510 |
| MAX. DAYLIGHT | mm | 830 | 940 |
| DISTANCE BETWEEN TIE ROD | mm | 425X425 | 510X460 |
| PLATEN SIZE (H X V) | mm | 625X625 | 725X675 |
| EJECTOR STROKE | mm | 140 | 140 |
| EJECTOR FORCE | KN | 50 | 50 |
| TOTAL MOULD CARRING CAPACITY | |||
| GENERAL | |||
| ELECTRIC MOTOR | kw | 30 | 30 |
| CONNECTED POWER | kw | 41.5 | 45.7 |
| TOTAL OIL CAPACITY | Ltr | 250 | 300 |
| WATER REQUIREMENT (Inlet temp. 29 deg) | Ipm | 50 | 50 |
| MACHINE DIEMENSION (L X W X H) | Mtr | 4.8X1.5X2.2 | 5.0X1.6X2.3 |
| MACHINE WEIGHT | kg | 4500 | 5600 |
