| MODEL | UNIT | SPM - 135 | ||
| INJECTION UNIT | ||||
| SHOT WEIGHT (GPPS) | gms | 224 | 283 | 349 |
| THEORETICAL DISPLACEMENT | cc | 251 | 318 | 393 |
| INJECTION PRESSURE | bar | 2110 | 1659 | 1344 |
| INJECTION RATE | cc/sec | 116 | 146 | 181 |
| INJECTION SCREW STROKE | mm | 200 | 200 | 200 |
| SCREW DIAMETER | mm | 40 | 45 | 50 |
| SCREW L/D RATIO | n° | 25 | 22.2 | 20 |
| SCREW SPEED | rpm | 250 | 250 | 250 |
| PLASTICIZING RATE (GPPS) | gm/sec | 18.7 | 26.5 | 35.4 |
| NOZZLE DEPTH | mm | 45 | 45 | 45 |
| NOZZLE HOLDING FORCE | KN | 45 | ||
| HEATING POWER | kw | 11.5 | ||
| NO OF HEATING ZONE | n° | 4+1 | ||
| CLAMP UNIT | ||||
| MOULD CLAMPING FORCE | KN | 1300 | ||
| MOULD OPENING STROKE | mm | 380 | ||
| MOULD HEIGHT MIN / MAX | mm | 180/480 | ||
| MAX. DAYLIGHT | mm | 860 | ||
| DISTANCE BETWEEN TIE ROD | mm | 460X425 | ||
| PLATEN SIZE (H X V) | mm | 660X625 | ||
| EJECTOR STROKE | mm | 140 | ||
| EJECTOR FORCE | KN | 50 | ||
| GENERAL | ||||
| ELECTRIC MOTOR | kw | 15 | ||
| CONNECTED POWER | kw | 26.5 | ||
| TOTAL OIL CAPACITY | Ltr | 250 | ||
| WATER REQUIREMENT (Inlet temp. 29 deg) | Ipm | 50 | ||
| MACHINE DIEMENSION (L X W X H) | Mtr | 4.8X1.5X2.2 | ||
| MACHINE WEIGHT | kg | 5300 | ||
