| MODEL | UNIT | SPM - 160 | ||
| INJECTION UNIT | ||||
| SHOT WEIGHT (GPPS) | gms | 311 | 384 | 465 |
| THEORETICAL DISPLACEMENT | cc | 349 | 432 | 522 |
| INJECTION PRESSURE | bar | 2079 | 1684 | 1392 |
| INJECTION RATE | cc/sec | 145 | 179 | 217 |
| INJECTION SCREW STROKE | mm | 220 | 220 | 220 |
| SCREW DIAMETER | mm | 45 | 50 | 55 |
| SCREW L/D RATIO | n° | 24 | 21.6 | 19.6 |
| SCREW SPEED | rpm | 250 | 250 | 250 |
| PLASTICIZING RATE (GPPS) | gm/sec | 26.2 | 35.4 | 46.5 |
| NOZZLE HOLDING FORCE | KN | 45 | ||
| HEATING POWER | kw | 15.7 | ||
| NO OF HEATING ZONE | n° | 4+1 | ||
| CLAMP UNIT | ||||
| MOULD CLAMPING FORCE | KN | 1600 | ||
| MOULD OPENING STROKE | mm | 430 | ||
| MOULD HEIGHT MIN / MAX | mm | 200/510 | ||
| MAX. DAYLIGHT | mm | 940 | ||
| DISTANCE BETWEEN TIE ROD | mm | 510X460 | ||
| PLATEN SIZE (H X V) | mm | 725X675 | ||
| EJECTOR STROKE | mm | 140 | ||
| EJECTOR FORCE | KN | 50 | ||
| GENERAL | ||||
| ELECTRIC MOTOR | kw | 18.5 | ||
| CONNECTED POWER | kw | 34.2 | ||
| TOTAL OIL CAPACITY | Ltr | 300 | ||
| MACHINE DIEMENSION (L X W X H) | Mtr | 5.0X1.6X2.3 | ||
| MACHINE WEIGHT | kg | 6500 | ||
