| MODEL | UNIT | SPM - 400 | ||
| INJECTION UNIT | ||||
| SHOT WEIGHT (GPPS) | gms | 1285 | 1474 | 1678 |
| THEORETICAL DISPLACEMENT | cc | 1443 | 1656 | 1885 |
| INJECTION PRESSURE | bar | 1987 | 1731 | 1521 |
| INJECTION RATE | cc/sec | 303 | 348 | 396 |
| INJECTION SCREW STROKE | mm | 375 | 375 | 375 |
| SCREW DIAMETER | mm | 70 | 75 | 80 |
| SCREW L/D RATIO | n° | 24 | 22.4 | 21 |
| SCREW SPEED | rpm | 180 | 180 | 180 |
| PLASTICIZING RATE (GPPS) | gm/sec | 61.2 | 77.7 | 87.6 |
| NOZZLE DEPTH | mm | 50 | 50 | 50 |
| NOZZLE HOLDING FORCE | KN | 73 | ||
| HEATING POWER | kw | 32 | ||
| NO OF HEATING ZONE | n° | 5+1 | ||
| CLAMP UNIT | ||||
| MOULD CLAMPING FORCE | KN | 4000 | ||
| MOULD OPENING STROKE | mm | 730 | ||
| MOULD HEIGHT MIN / MAX | mm | 300X750 | ||
| MAX. DAYLIGHT | mm | 1480 | ||
| DISTANCE BETWEEN TIE ROD | mm | 760X760 | ||
| PLATEN SIZE (H X V) | mm | 1100X1100 | ||
| EJECTOR STROKE | mm | 200 | ||
| EJECTOR FORCE | KN | 75 | ||
| GENERAL | ||||
| ELECTRIC MOTOR | kw | 45 | ||
| CONNECTED POWER | kw | 77 | ||
| TOTAL OIL CAPACITY | Ltr | 650 | ||
| WATER REQUIREMENT (Inlet temp. 29 deg) | Ipm | 100 | ||
| MACHINE DIEMENSION (L X W X H) | Mtr | 8.0X2.2X3.0 | ||
| MACHINE WEIGHT | kg | 16200 | ||
