| MODEL | UNIT | SPM - 325 | ||
| INJECTION UNIT | ||||
| SHOT WEIGHT (GPPS) | gms | 1034 | 1199 | 1376 |
| THEORETICAL DISPLACEMENT | cc | 1161 | 1347 | 1546 |
| INJECTION PRESSURE | bar | 1960 | 1690 | 1472 |
| INJECTION RATE | cc/sec | 259 | 300 | 345 |
| INJECTION SCREW STROKE | mm | 350 | 350 | 350 |
| SCREW DIAMETER | mm | 65 | 70 | 75 |
| SCREW L/D RATIO | n° | 24 | 22.2 | 20.8 |
| SCREW SPEED | rpm | 210 | 210 | 210 |
| PLASTICIZING RATE (GPPS) | gm/sec | 58.8 | 71.4 | 90.6 |
| NOZZLE DEPTH | mm | 50 | 50 | 50 |
| NOZZLE HOLDING FORCE | KN | 73 | ||
| HEATING POWER | kw | 26.5 | ||
| NO OF HEATING ZONE | n° | 5+1 | ||
| CLAMP UNIT | ||||
| MOULD CLAMPING FORCE | KN | 3250 | ||
| MOULD OPENING STROKE | mm | 650 | ||
| MOULD HEIGHT MIN / MAX | mm | 300/700 | ||
| MAX. DAYLIGHT | mm | 1350 | ||
| DISTANCE BETWEEN TIE ROD | mm | 720X660 | ||
| PLATEN SIZE (H X V) | mm | 1025X965 | ||
| EJECTOR STROKE | mm | 200 | ||
| EJECTOR FORCE | KN | 65 | ||
| GENERAL | ||||
| ELECTRIC MOTOR | kw | 37 | ||
| CONNECTED POWER | kw | 63.5 | ||
| TOTAL OIL CAPACITY | Ltr | 550 | ||
| WATER REQUIREMENT (Inlet temp. 29 deg) | Ipm | 120 | ||
| MACHINE DIEMENSION (L X W X H) | Mtr | 7.2X2.0X2.7 | ||
| MACHINE WEIGHT | kg | 13800 | ||
