| MODEL | UNIT | SPM - 200 | ||
| INJECTION UNIT | ||||
| SHOT WEIGHT (GPPS) | gms | 437 | 529 | 629 |
| THEORETICAL DISPLACEMENT | cc | 491 | 594 | 707 |
| INJECTION PRESSURE | bar | 2058 | 1700 | 1429 |
| INJECTION RATE | cc/sec | 165 | 200 | 238 |
| INJECTION SCREW STROKE | mm | 250 | 250 | 250 |
| SCREW DIAMETER | mm | 50 | 55 | 60 |
| SCREW L/D RATIO | n° | 24 | 21.8 | 20 |
| SCREW SPEED | rpm | 250 | 250 | 250 |
| PLASTICIZING RATE (GPPS) | gm/sec | 35.4 | 46.5 | 55.4 |
| NOZZLE HOLDING FORCE | KN | 60 | ||
| HEATING POWER | kw | 18.8 | ||
| NO OF HEATING ZONE | n° | 4+1 | ||
| CLAMP UNIT | ||||
| MOULD CLAMPING FORCE | KN | 2000 | ||
| MOULD OPENING STROKE | mm | 475 | ||
| MOULD HEIGHT MIN / MAX | mm | 200/550 | ||
| MAX. DAYLIGHT | mm | 1025 | ||
| DISTANCE BETWEEN TIE ROD | mm | 560X510 | ||
| PLATEN SIZE (H X V) | mm | 800X750 | ||
| EJECTOR STROKE | mm | 180 | ||
| EJECTOR FORCE | KN | 50 | ||
| GENERAL | ||||
| ELECTRIC MOTOR | kw | 22 | ||
| CONNECTED POWER | kw | 40.8 | ||
| TOTAL OIL CAPACITY | Ltr | 400 | ||
| WATER REQUIREMENT (Inlet temp. 29 deg) | Ipm | 50 | ||
| MACHINE DIEMENSION (L X W X H) | Mtr | 5.5X1.7X2.5 | ||
| MACHINE WEIGHT | kg | 8600 | ||
