| MODEL | UNIT | SPM - 250 | ||
| INJECTION UNIT | ||||
| SHOT WEIGHT (GPPS) | gms | 634 | 754 | 886 |
| THEORETICAL DISPLACEMENT | cc | 712 | 848 | 995 |
| INJECTION PRESSURE | bar | 2036 | 1711 | 1457 |
| INJECTION RATE | cc/sec | 155 | 232 | 272 |
| INJECTION SCREW STROKE | mm | 300 | 300 | 300 |
| SCREW DIAMETER | mm | 55 | 60 | 65 |
| SCREW L/D RATIO | n° | 24 | 22 | 20.3 |
| SCREW SPEED | rpm | 210 | 210 | 210 |
| PLASTICIZING RATE (GPPS) | gm/sec | 39.2 | 46.6 | 58.8 |
| NOZZLE DEPTH | mm | 50 | 50 | 50 |
| NOZZLE HOLDING FORCE | KN | 60 | ||
| HEATING POWER | kw | 21.3 | ||
| NO OF HEATING ZONE | n° | 6 | ||
| CLAMP UNIT | ||||
| MOULD CLAMPING FORCE | KN | 2500 | ||
| MOULD OPENING STROKE | mm | 580 | ||
| MOULD HEIGHT MIN / MAX | mm | 250/650 | ||
| MAX. DAYLIGHT | mm | 1230 | ||
| DISTANCE BETWEEN TIE ROD | mm | 660X610 | ||
| PLATEN SIZE (H X V) | mm | 950X900 | ||
| EJECTOR STROKE | mm | 200 | ||
| EJECTOR FORCE | KN | 65 | ||
| GENERAL | ||||
| ELECTRIC MOTOR | kw | 30 | ||
| CONNECTED POWER | kw | 51.3 | ||
| TOTAL OIL CAPACITY | Ltr | 450 | ||
| WATER REQUIREMENT (Inlet temp. 29 deg) | Ipm | 75 | ||
| MACHINE DIEMENSION (L X W X H) | Mtr | 6.3X1.8X2.5 | ||
| MACHINE WEIGHT | kg | 10800 | ||
